Support Center

To get more battery life from your headphones, try these tips:
- Lower the volume.
- Turn off ANC
- Disable smart features and Spatial Audio.
- Power off the headphones when you're not using them.

1. Press and hold the Multi-Funtion Button for 2 seconds to power on, the headphones will enter pairing mode automatically.
2. Turn on Bluetooth on your device.
3. Select "QCY H3" from the available device list.

1. Clear the pairing records between the headphones and all of the previous devices.
2. Re-pair your headphones and the device.
If that doesn’t work:
- Try pairing with another device to check for compatibility issues.
- Ensure there are no objects blocking the Bluetooth signal.

To connect two devices:
Step 1. Pair the headphones with device A.
Step 2. Disable Bluetooth on device A, and the headphones will enter pairing mode.
Step 3. Pair the headphone with device B.
Step 3. Re-enable Bluetooth on device A and reconnect to the headphones.
After this initial setup, the headphones will automatically connect to both devices next time.

To reset H3:
1. Press and hold both VOL+ and VOL- buttons for 10 seconds
2. The headphones' LED will flash red 3 times, indicating a successful reset.

There is no microphone on the supplied AUX cable, but you can use the microphone on the connected device while using QCY H3 in AUX mode.

Update the fireware on the QCY App, Before updating:
1. Ensure your headphones have at least 20% battery.
2. Make sure both earbuds are connected to the QCY app.
3. Don’t use the earbuds during the update.
4. Keep the earbuds in the charging case with the lid open.

Try to re-pair your headphones: Clear the pairing records on your phone, then re-pair the earbuds to your device.

We recommend trying the following steps:
- Verify that the audio output device on your phone is set to "QCY H3"
- If you're making the call through an app, try making a direct call using your phone's regular calling feature to check if the issue persists.
- Test your earbuds with a different Bluetooth device in a different environment to see if the problem improves.

You can try the following troubleshooting steps:
- Check the audio source: Test different types of music and make sure the audio source is clear and free of distortion or noise.
- Customize the EQ settings: Use the QCY app to try different EQ modes or customize the sound profile to suit your preferences.

Real-time monitoring of changes in the environment and audio leakage to adjust noise-cancellation capabilities. With adaptive noise canceling, you can experience the optimal effect of noise reduction and maximum tranquility. Please note that this feature is off by default and can be enabled via the QCY app.