Fast, Free Delivery
Money-Back Guarantee
Lifetime Customer Support
365 Days Warranty
Support Center
QCY H3S
Find product guides, troubleshooting answers, manuals and customer support.
FAQ
Why does the QCY app ask for location access?
The app itself doesn’t normally need location access. However, when Bluetooth Low Energy (BLE) is used to find your earbuds, Android requires location permission.
If you prefer not to share your location, close the app and try pairing again.
How to connect to the QCY app?
1. Get the QCY App.
The QCY app is available on iOS and Android devices. It can be installed from the Google Play Store or the Apple App Store.
2. Connect the QCY earbuds with your device via Bluetooth (i.e. a smartphone or tablet)
3. Use the QCY app for enhanced product experience.
How to use the headphone finder function？
The earphones can only be used when connected to both the phone's Bluetooth and the app.
1. Open the QCY app, go to Settings, and tap the earphone location feature to see the earphones' exact location.
2. Tap to play a sound to locate the earphones by listening to the audio.
How to update your headphones' firmware？
1. Connect your headphones to the QCY app.
2. Go to Settings - Firmware Update.
3. Tap Update.
4. If no firmware update is displayed, your firmware is already up-to-date.
What to do if firmware update fails?
1. Check network signal issues, such as cellular signal/Wi-Fi signal.
2. Try not to exit the background/update page during the upgrade process.
What should I do if my earbuds are not found on the QCY App?
1. Pair the earbuds with your phone.
2. Open the QCY app, scroll to the bottom, and click "Add Devices."
3. If "H3S" pops up, select it to connect.
4. If not, click "Set Up Manually" and choose "H3S" from the list to connect.
How do I check the battery level of the earphone?
Pair the earphone with the QCY app on your phone to check the battery level.
To download the app, just search for "QCY" in your app store.
Why can't my headphones turn on?
1. Make sure the earphones are charged.
2. Check if the ear tips are installed properly.
3. If the earbuds still don’t turn on after charging, contact our service center.
My headphones' battery runs out too quickly. What can I do?
This could be due to incorrect charging method.
Please completely drain your earphones' battery, then recharge them using a 5V charger for about two hours.
How to pair H3S?
1. Press and hold the Multi-Funtion Button for 2 seconds to power on, the headphones will enter pairing mode automatically.
2. Turn on Bluetooth on your device.
3. Select "QCY H3S" from the available device list.
How can I enable multipoint connection?
To connect two devices:
1. Pair the headphones with device A.
2. Disable Bluetooth on device A, and the headphones will enter pairing mode.
3. Pair the headphone with device B.
4. Re-enable Bluetooth on device A and reconnect to the headphones.
After this initial setup, the headphones will automatically connect to both devices next time.
How to reset headphones?
【How to Restore QCY H3S Factory Settings】
Turn on the headphones and simultaneously press and hold the Volume Up and Volume Down buttons for 10 seconds, or until the LED indicator flashes red 3 times. This will restore factory settings. The headphones will then automatically reconnect.
After resetting, please use the pairing method you used upon first use to connect.
What's the difference between connecting the H3 Pro via AUX cable and using Bluetooth?
There is no microphone on the supplied AUX cable, but you can use the microphone on the connected device while using QCY H3 in AUX mode.
How should I care for my earphone?
1. Use your earphone regularly to avoid battery over-discharge. Aim to use them at least once a month.
2. Charge the earphone after each use, and don't wait until they drop below 20% to charge.
3. Avoid pulling on the headband of the headphones during use to prevent breakage.
How to use a wired connection for H3S?
Double-ended Type-C cable.
How to switch between ANC/transparency/normal modes?
You can switch between modes within the application:
Path: Device -- Sound -- Turn on Noise Cancellation.
Alternatively, you can switch between different modes by pressing the ANC button.
What can I do if the headphones have poor sound quality?
You can try the following troubleshooting steps:
- Check the audio source: Test different types of music and make sure the audio source is clear and free of distortion or noise.
- Customize the EQ settings: Use the QCY app to try different EQ modes or customize the sound profile to suit your preferences.
What is adaptive noise canceling?
Real-time monitoring of changes in the environment and audio leakage to adjust noise-cancellation capabilities. With adaptive noise canceling, you can experience the optimal effect of noise reduction and maximum tranquility. Please note that this feature is off by default and can be enabled via the QCY app.
Manuals
Still Need Help?
Call Us+1 (917) 807-6754
Submit FeedbackSubmit Here
Chat with Us
Customer Supportservice@qcyearphone.com
Marketing & Partnershiprice@qcyearphone.com
Press Inquirypr@qcyearphone.com